PLASMA CUTTER
Plasma cutter are used in body shop for cutting of metals. Plasma is nothing but fourth state of matter. Pressurized air is made to pass on the job , when the electrode (torch) comes in contact with the job an arc is produced which heats up the pressurized gas and creates plasma which is sufficient to cut the metal.
Model : Plasma 22
ApplicationsFeatures & BenefitsSpecificationsDownloadsRequest a Quote
- Suitable for all models of passenger cars , SUV and MPV
- Suitable for jobs with 6 – 8 mm sheet thickness
- Inverter technology
- Equipped with power factor correction device
- Pilot Arc to cut painted or coated metals
- Cutting operation on superimposed thin sheets
- Safety systems on the torch
- Pilot arc starts without high frequency – so the machine can be operated next to electronic devices sensitive to high frequencies
- Post-gas function
- Electronic regulation of cutting current
- Microprocessor-controlled cutting parameters and functions
- Low power consumption
- Precise cutting and removing of damaged parts
- 4 metre-long P25 torch – comfortable to operate
- Thermostatic protection
- High duty cycle
| S.No | Specifications | Plasma Cutter |
|---|---|---|
| 1 | Dimensions | 135x430x260h mm |
| 2 | Input Voltage | 1×230 V 50-60 HZ |
| 3 | Cutting current | 5 -20 A |
| 4 | Duty cycle – 10 MIN CYCLE | 35% 20 A – 60% 18 A – 100% 15 A |
| 5 | Compressor air pressure | 4 -7 bar |
| 6 | Air flow | 40 l/min |
| 7 | Cut thickness on steel | 6 – 8 mm |
| 8 | Max separation cut | 10 mm |
| 9 | Protection class | IP 23 |
| 10 | Weight | 9.5 kg |
