Is Tyre Lubricant Necessary When Mounting Tyres?
A tyre mounting lubricant is used when mounting a tyre onto a wheel rim. The lubricant helps to prevent the tyre’s beads from sitting improperly on the rim, which can cause problems with the tyre’s seal and air pressure. The lubricant also makes removing the tyre from the rim easier if necessary.
Many people believe that tyre lubricant is unnecessary and is just an extra step that is not worth the hassle. However, there are several good reasons to use a tyre mounting lubricant. Read on to understand more.
Reasons Why aTyre Mounting Lubricant Is Necessary
- One reason to use a tyre mounting lubricant is to prevent improper bead seating. We believe that if the tyre beads are not properly seated on the rim, it can cause air leaks and other problems. The lubricant helps keep the beads in place, so they sit properly.
- Another reason to use a tyre mounting lubricant is to make removing the tyre from the rim easier. Removing the tyre from the rim can be difficult without damage if the beads seat improperly. The lubricant helps release the bead so that it can be removed without damage.
- Many people also use tyre mounting lubricant to prevent corrosion. The lubricant creates a barrier between the rim’s metal and the tyre’s rubber. This prevents the two materials from coming into contact with each other and corroding.
Choosing The Best Tyre Mounting Lubricant
When choosing a tyre mounting lubricant, it is important to choose one compatible with your tyres’ materials and rims. Some lubricants are not meant for use with certain materials. Choosing a lubricant that is easy to apply and spread evenly is also important.
When choosing the tyre mounting paste, you should emphasize choosing the best and apply it correctly. The most preferred tyre lubricants are made from animal fats or vegetable oils. Ideally, they should contain at least 10% solids mixed in a water-based solution and also have a corrosion inhibitor. Manufacturers ensure they are available in a ready-to-use mixture or concentrate form.
When mixing the concentrates, all the manufacturer’s recommendations should be followed, and proper stirring and mixing before every use should be practiced.
The lubricants are preferred in a slippery wet texture and without a residual lubricity when they dry up. This is important in assuring that a firm bead setting is maintained even with the possibility of the tyre slipping in the event of sudden torque application, braking or acceleration.
It is important to note that using the wrong tyre mounting lubricant can damage your tyres and rims. Be sure to use a quality product from a reputable manufacturer that is designed for use on tyres. Our company has amazing vehicle care products, including the tyre mounting lubricant and the tyre mounting paste. Our products are well revered in the market and are known to make tyre mounting an easy and safe process.
Applying The Tyre Mounting Lubricant
Once you have chosen the best tyre mounting lubricant for your tyres, you need to apply it properly. Our lubricants come with instructions on how to apply them. In general, you will want to apply the lubricant to both the rim and the tyre. Using a brush, apply it evenly and cover both the inside and outside of the tyre.
After applying the lubricant, you can proceed with mounting the tyre onto the rim. Once the tyre is mounted, you can check it for proper bead seating. If everything looks good, you can proceed with inflating the tyre to the manufacturer’s indicated pressure.
If you have any problems mounting the tyre or if you see any leaks, deflate the tyre and start over. Be sure to add more lubricant if necessary
What to Avoid When Looking for A Tyre Lubricant
When looking for a tyre lubricant, ensure that you do not use petroleum-based ones. Because of their components, they can chemically attack your tyre and make it wear out easily.
It is also advisable to avoid solvent-based lubricants since they can create an explosive chemical mixture in the tyre’s air cavity because of their composition. In addition, this type of tyre lubricant may also weaken the tyre on the rubbering covering the tyre bead area.
You should also avoid using silicon-based lubricants since they cause tyre slippage around the rim. When lubricating a tyre, ensure that the lubricant does not get to the inside. The tyre must be clean and dry inside to provide the much-needed safety.
How Much Tyre Mounting Paste Should You Use On One Go?
The simple answer is not to overdo it. A small amount of tyre lubricant will go a long way. You only need to apply a thin layer to the rim and the tyre bead. The main and simple aim is to get a consistent sliding area without any material being left inside once the tyre beads are well seated.
If you are mounting multiple tyres, you can reuse the same lubricant if it is still in good condition. Add more if necessary. It is important to note that too much lubricant can be harmful. If there is too much lubricant on the bead, it can cause the tyre to slip on the rim when inflated. This can damage both the tyre and the rim.
You should also avoid using old or expired tyre lubricants. This can cause adhesion problems and may even damage your tyres and rims. It is also important to keep the tyre’s interior dry as it reduces the possibility of having contaminated materials in the tyre.
Tyre mounting lubricant is a necessary part of mounting your tyres. By following the manufacturer’s instructions and using the right amount, you can be sure that your tyres will be mounted properly and will last a long time.
Conclusion
With the right tyre lubricant and your skills, you will always enjoy mounting your tyres. There are many do’s and don’ts when it comes to lubricating your tyres. However, if you meticulously follow the guidelines mentioned above and use the right products related to tyre mounting lubricant from ATS ELGI – Leading Automotive Garage Equipment’s Manufacturer, you will avoid any problems that might arise during the process.